The main malfunctions of the water crane belongs to the flow of “nose”. And there can be many reasons here: and anfalled carving, wear of the gasket or its complete absence, etc.P.
But it happens and vice versa-the rod is completely turned out, and the water does not flow for some reason.
The reason for this situation may be pollution of the crane or sticking the gasket. Conventional places of sticking – the saddle of the cranes or the sidewall of the mixer. And this arises due to the fact that this tap has not been used for a long time.
To eliminate such a malfunction, it is necessary to remove the head from the tap. In this case, the valve should be in a closed state. So, you separated the head and carefully examine the valve nest. If you did not find gaskets there, inspect the saddle in the crane housing. To make it more convenient to find “loss”, shut up yourself with a flashlight.
Когда же присохшая прокладка будет обнаружена, ее нужно удалить с помощью отвертки. In this case, the gasket is often torn, and its pieces remain on the details of the crane. Then, using the same screwdriver, clean the crane parts from pieces of adhered gasket.
Then put on a new gasket on the crane head. Open the valve, and as soon as water appears, return the head with a laying to place (to the crane building).
